We use cookies to give you a good experience on our website and to gather statistics.
Read more about our use of cookies here

Models: 3-step model 4-step model 5-step model 6-step model

FlexStep by Liftup

The convertible 2-in-1 solution saves a lot of space compared to both stairs and a lifting platform. The FlexStep is easy to integrate due to a wide range of design options and configurations.

FlexStep is the perfect solution for wheelchair users and walking-impaired persons who have to overcome level differences, especially where space available is limited; this 2-in-1 product combines staircase and lifting platform the optimum way. The most space-saving lift available in the market and even in a design that accommodates the most discerning taste.

FlexStep Design

The unique design offers the best opportunities for adaptation to the surrounding architecture and fittings. Various details can be adjusted to each customers needs to integrate the solution completely into the environment. 

All customers have influence on materials, configuration, colours and shapes.

FlexStep Safety

Safety protections ensure risk-free use of the FlexStep. The four intelligent synchronized motors ensure calm and safe transport between levels.

As standard, the FlexStep is fitted with all conceivable safety measures.

Find a distributor for more information about FlexStep, prices, delivery time etc.

FlexStep Benefits
  • Innovative, effective design for disabled access
  • High Quality European product
  • Easy to integrate in both new and existing buildings
  • Both indoor and outdoor use
  • No structural alterations are neccessary, just a level floor
  • Safe to use
  • Runs even during power failures
FlexStep video

Be inspired

FlexStep Models

Below, you find the technical overview of our different standard FlexStep models available. The FlexStep is available in four different standard step widths: 700, 800, 900 and 1.000mm. Please contact our sales team or local distributor if your specific needs are not shown here - each model is available in hundreds of configurations and we are experts in adaptation to the surroundings and in matching our customer requirements.

Recommended for lifting heights between 360 and 740 mm

The 3-step FlexStep model is intended for travels up to 555 mm. With the 2 top stop software max. travel is 740 mm.

Model 3-SHORT is fitted with only 915 mm platform length allowing it to be installed in areas with virtually no room for a lift! Domestic use only.

Model 3+1 comes with a platform length of 1250 mm. This will allow the unit to be used for public acces in most places. 

FlexStep :

Drawing of 3 step model (pdf)

FlexStep V2 :

Drawing of 3 step model (pdf)

Drawing of 3+1 step model (pdf)

  • Lifting height 1 stop 360-555 mm
  • Lifting height 2 stop 480-740
  • Lenght (stairs) 1145-1286 mm
  • Inside step width 700 / 800 / 900 / 1000 mm
  • Overall width 920 / 1020 / 1120 / 1220 mm
  • Lifting capacity V1/V2 250 kg. / 400 kg. 2 prs.
  • Lifting speed 50 mm / s
  • Weight 120 kg.
  • Noise < 70 db.
  • Duty V1/V2 2 min. / 18 min. or 2 min. / 5 min.

Recommended for lifting heights between 555 and 925 mm

The 4-step FlexStep model is intended for travels up to 925mm. Travels higher than 740 mm requires the space saving "2-stop point" feature where the upper step on the FlexStep staircase is lower than the upper threshold and the threshold is actually step no 5 on the staircase.

The 4-step model has a platform length of 1220 mm.

The 4+1-model has a platform length of 1495 mm.

FlexStep :

Drawing of 4-step model (pdf)

FlexStep V2 :

Drawing of 4-step model (pdf)

Drawing of 4+1-step model (pdf)

  • Lifting height 1 stop 550-730 mm
  • Lifting height 2 stop 730-925 mm
  • Lenght (stairs) 1115-1240 mm
  • Inside step width 700 / 800 / 900 / 1000 mm
  • Overall width 920 / 1020 / 1120 / 1220 mm
  • Lifting capacity V1/V2 250 kg. / 400 kg. 2 prs.
  • Lifting speed 50 mm / s
  • Weight 120 kg.
  • Noise < 70 db.
  • Duty V1/V2 2 min. / 18 min. or 2 min. / 5 min.

Recommended for lifting heights between 700 and 1110 mm

The 5-step FlexStep model is intended for travels up to 1110 mm. Travels higher than 720 mm requires the space saving "2-stop point" feature where the upper step on the FlexStep staircase is lower than the upper threshold and the threshold is actually step no. 6 on the staircase.

The 5-step model has a platform length of 1525 mm.

FlexStep :

Drawing of 5-step model (pdf)

FlexStep V2 :

Drawing of 5-step model (pdf)

  • Lifting height 1 stop 730-925 mm
  • Lifting height 2 stop 925-1110 mm
  • Lenght (stairs) 1345-1472 mm
  • Lenght (platform up) 1550 mm
  • Lenght (platform down) 1685mm
  • Inside step width 700 / 800 / 900 / 1000 mm
  • Overall width 920 / 1020 / 1120 / 1220 mm
  • Lifting capacity V1/V2 250 kg. / 400 kg. 2 prs.
  • Lifting speed 50 mm / s
  • Weight 120 kg.
  • Noise < 70 db.
  • Duty V1/V2 2 min. / 18 min. or 2 min. / 5 min.

Recommended for lifting heights between 720 and 1.250 mm

The 6-step FlexStep model is intended for travels up to 1250 mm. Travels higher than 1110 mm requires the space saving "2-stop point" feature where the upper step on the FlexStep staircase is lower than the upper threshold and the threshold is actually step no. 7 on the staircase.

The 6-step model has a platform length of 1830 mm.

FlexStep :

Drawing of 6-step model (pdf)

FlexStep V2 :

Drawing of 6-step model (pdf)

 

  • Lifting height 1 stop 925-1110 mm
  • Lifting height 2 stop 1110-1250 mm
  • Lenght (stairs) 1593-1720 mm
  • Lenght (platform up) 1835 mm
  • Lenght (platform down) 1990mm
  • Inside step width 700 / 800 / 900 mm
  • Overall width 920 / 1020 / 1120 mm
  • Lifting capacity V1/V2 250 kg. / 400 kg. 2 prs.
  • Lifting speed 50 mm / s
  • Weight 120 kg.
  • Noise < 70 db.
  • Duty V1/V2 2 min. / 18 min. or 2 min. / 5 min.
Signup for our newsletter

Receive news in your mailbox!